|
· To operate AUTOMATICALLY you select
No. 6 (AUTO) on the SELECTOR.
AUTO Light is on.
The Curing will automatically advance, starting from the ambient
D.B. temperature in the barn changing Automatically the Curing
phases following exactly the curing program. The rate of Temperature
Increase, DT, DB and WB temperature limits where the operator
wishes to stop, as well as the duration of each stop, can
be reprogrammed from the operator (if he wishes so) with the
use of "SETTINGS" and +, - buttons. The Computer's
detailed operation mode is described in the VENTOBACCO VK
981 OPERATOR'S MANUAL.
More details on VK 981 Curing Computer
· By pressing SELECT & START buttons together,
Operator can see where the "Floating" D.B. is set
automatically by the control at that precise moment
If he wants to increase or decrease the "floating"
temperature, he can do so by pressing button + or - while
he keeps pressed SELECT & START buttons.
· Sensors calibration : factory calibrated. Calibration
can be checked or changed (if a sensor is changed) from control's
menu.
· Differential : (Hysterisis) : Can be changed from
Control's menu.
Electrical & sensor's connection
[pg.1]
[pg.2] [pg.3]
[pg.4] [pg.5]
|
